View B65659F0001X101_1216182.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PM/P/P Cores Halves/EP/TT/PR Cores
Series/Type:
P 18 x 11
The following products presented in this data sheet are being withdrawn. Ordering Code B65651D0000R026 B65652A50000000 B65659F0001X101 Substitute Product B65651D0000R048 B65659F0001X023 Date of Withdrawal 2002-08-02 2004-10-18 2004-01-23 Deadline Last Orders 2002-12-31 2005-03-31 Last Shipments 2003-03-31 2005-09-30
For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at www.epcos.com/sales.
P 18 x 11 Core
I In accordance with IEC 60133 I Pot cores are supplied in sets
B65651
Magnetic characteristics (per set) with without center hole center hole
l/A le Ae A min Ve
0,6 25,9 43 -- 1 120
0,57 26,6 46,7 33,9 1 240
mm-1 mm mm2 mm2 mm3
Approx. weight (per set) m Gapped Material A L value nH K1 M33 N48 40 3 % 100 3 % 160 2 % 250 3 % 315 3 % 400 3 % 500 3 % 630 5 % s approx. mm 1,60 0,60 0,32 0,20 0,15 0,10 0,07 0,05 6,0 6,6 g
e
Ordering code 1) -D with center hole -T w. threaded sleeve B65651-+40-A1 B65651-+100-A33 B65651-+160-G48 B65651-+250-A48 B65651-+315-A48 B65651-+400-A48 B65651-+500-A48 B65651-D630-J48
19 48 77 120 151 192 240 302
Ungapped Material A L value nH N26 N30 T38 N87 2900 + 30/- 20 % 1380 5900 + 30/- 20 % 2680 12600 + 40/- 30 % 5710 3600 + 30/- 20 % 1630 2000
e
AL1min P V nH W/set
Ordering code -D with center hole -W w/o center hole B65651-D-R26 B65651-W-R30 B65651-W-Y38
< 0,46 B65651-W-R87 (200 mT, 100 kHz, 100 C)
1) Replace the + by the code letter "D" or "T" for the required version.
334 08/01
P 18 x 11 Accessories
Coil former Standard: Material: Winding: to IEC 60133 and DIN 41 294 GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085: F max. operating temperature 155 C), color code black see "Processing Notes", page 155
B65652
Insulating washer 1 between core and coil former
I For tolerance compensation and for insulation I Polycarbonate spring washer (UL 94 V-0, insulation class to IEC 60085: E
120 C), 0,04 mm thick
Insulating washer 2 between core and terminal carrier
I For increased dielectric strength I Made of polycarbonate (UL 94 V-0, insulation class to IEC 60085: E
120 C), 0,08 mm thick Bestellnummer
Coil former Sections 1 2 AN mm2 16 13 lN mm 35,6 35,6 A R value 87 94
B65652-B-T1 B65652-B-T2 B65652-A5000 B65652-A5002
Insulating washer 1 (reel packing, PU = 1 reel) Insulating washer 2 (bulk) Coil former
0,4 AN
2+0,6 14,8 _ 0,2 o7,7+0,1 o8,7 _ 0,1 o7,7+0,1 o8,7 _ 0,1
0,5 7_ 0,1 7_ 0,1
0,5
FPK0274-7
Insulating washer 1
Insulating washer 2
335 08/01
P 18 x 11 Accessories
Mounting assembly for printed circuit boards
I The set comprises a terminal carrier and a yoke I For snap-in connection
B65655
Terminal carrier GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085: F max. operating temperature 155 C), color code gray Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 C, 2 s Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 C, 3,5 s Yoke Spring yoke, made of tinned nickel silver (0,3 mm), with ground terminal Complete mounting assembly (4 solder terminals) Ordering code: B65655-B9 Complete mounting assembly (8 solder terminals) Ordering code: B65655-B10 Material:
4 solder terminals
Ground Erdungspunkt
8 solder terminals
Erdungspunkt
Ground
19,9 max.
20 max. a
13,5 max.
*)
20 max. a
19,9 max.
*)
b
Hole arrangement View in mounting direction
Ground Erdungspunkt
13,5 max.
3,5
o1,3+0,1
20,7 max.
2,54
FPK0295-U
o1,3+0,1
3,5
4 5
1 8
4 5
1 8
c
Hole arrangement View in mounting direction
Ground Erdungspunkt
20,7 max.
2,54
FPK0296-3
*) a) b) c)
This recess must be on the side of the grounding pin to ensure that the yoke locks in position. Yoke Terminal carrier with 4 solder terminals Terminal carrier with 8 solder terminals
336 08/01
P 18 x 11 Accessories
Adjusting screw
I Tube core with thread and core brake made of GFR polyterephthalate
B63399 B65659
Plastic adjusting screwdriver (not shown) Plastic handle for adjusting screwdriver (not shown) Core P 18 x 11 Material K1 M 33 N 48 Adjusting screw Material Color code Si 1 Si 1 Si 1 K1 N 22 N 22 white white white green black yellow Min. adjusting range % 13 10 7 10 16 12 16 13 B65659-F1-X101 B65659-F1-X101 B65659-F1-X101 B65659-F1-X1 B65659-F3-X23 B65659-F4-X23 B63399-B4 B63399-B5 Ordering code
Tube core AL value Fig. x length nH mm 40 100 160 250 315 400 400 500 a a a a b c 2,62 x 3,6 2,62 x 3,6 2,62 x 3,6 2,62 x 3,6 2,75 x 4,4 2,82 x 4,4
Adjusting screwdriver Handle
Adjusting screw a b c
337 08/01
Herausgegeben von EPCOS AG Marketing Kommunikation, Postfach 80 17 09, 81617 Munchen, DEUTSCHLAND EPCOS AG 2000. Alle Rechte vorbehalten. Vervielfaltigung, Veroffentlichung, Verbreitung und Verwertung dieser Broschure und ihres Inhalts ohne ausdruckliche Genehmigung der EPCOS AG nicht gestattet. Mit den Angaben in dieser Broschure werden die Bauelemente spezifiziert, keine Eigenschaften zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen fur Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird. Diese Broschure ersetzt die vorige Ausgabe. Fragen uber Technik, Preise und Liefermoglichkeiten richten Sie bitte an den Ihnen nachstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente konnen aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskunfte daruber bitten wir unter Angabe des betreffenden Typs ebenfalls uber die zustandige Vertriebsgesellschaft einzuholen.
Published by EPCOS AG Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS' prior express consent is prohibited. The information contained in this brochure describes the type of component and shall not be considered as guaranteed characteristics. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers' Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices.
1

▲Up To Search▲

Price & Availability of B65659F0001X101

	To Download B65659F0001X101 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .